How do I Fix a Hoshizaki DCM-500BAH cubelet ice maker that wont start any process?
The ice maker wont start any process, I've tested the water valve with 24v and it works, but it never starts by its own, the relay that controls the water works but it doesnt receive any signal to start, i've already replace the control board and didn't work, the fuses are all ok, the water fill sensor works fine, when down its open, and when up its closed, the compressor starts when jumps the relay on the timing board, and it gets cold the ice making tube, the gear motor starts only when jumps the cables, almost all the things that I've tryed works but there's no signal to the water inlet valve or its relay. I also don't know when its on the ICE cicle, because the button doesnt have any text on it, but when put all the way to the bottom (towards the ice maker) it start something like a flush mode, because the water on the reservoir comes out (the water filled manually), but when I put the button towards me, the machine doesnt do anything. Hoshizaki DCM 500 BAH cubelet ice maker.
Kitchen Appliances - Others - Hoshizaki - DCM-500 BAH 26" Stainless Steel Countertop Ice Maker
Please enter comments
Please enter your name.
Please enter the correct email address.
You must agree before submitting.

Helpful Social

Copyright © 2024 QA.XPDF.PUB - All rights reserved.