Turn off your Brother machine. Wait a few seconds, then turn it on again. Wait at least three minutes for the machine to join the network. If the issue continues, go to STEP 2.
Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask. > Click here to see how to use the Network Connection Repair Tool. If the issue continues, go to STEP 3.
Check your machine's wireless status by printing the WLAN report. > Click here to check the wireless status on the WLAN report.
If your WLAN report is stating "Connection OK", although you cannot print, refer to "Check the wireless status on the WLAN report" and check "Connection: OK".
Answers & Comments
Wait at least three minutes for the machine to join the network.
If the issue continues, go to STEP 2.
> Click here to see how to use the Network Connection Repair Tool.
If the issue continues, go to STEP 3.
> Click here to check the wireless status on the WLAN report.
If your WLAN report is stating "Connection OK", although you cannot print, refer to "Check the wireless status on the WLAN report" and check "Connection: OK".