How do I get the Malber all in one washer dryer to dry hotter. It seems to be getting cooler and cooler. It didn't use to be a problelm. I nolonger have the manual
Washing Machines - Malber - WD1000 Front Load Washer/Dryer
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
There is a wire which connects to a connection towards the front of the drum itself on the right side which when the drum wobbles, comes off. When it gets loose, it may start to arc so that the spade connector needs replacing. In extremis the whole unit may need replacing. This seems to govern whether the heater elements turn on or not. If you put the connector back on, I'll bet the heater starts to work again
I got in there and all the wires seemed connected. I haven't seen any sign of arcing. Thanks for answering.