1, Turn on the tv. 2. On the remote control, press the tv key once. 3. Press and hold SET until the LED blinks twice, then release SET. 4. Use the code to locate the typ of device and brand name and then enter the first four digit code for the device. If performed correctly, The LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the tv and press power once. The TV should turn off. If it does not repeat steps 2 to 5. trying each code for your brand until find one that works. If it doesn't work, try searching for you code.
BTW, I don't know the brand of your tv so you might as well try these steps to search for you code but if you want to use the steps above just reply to this and send me the brand of your tv so i can search for the code.
1. On the renote control, press TV once. 2. Press and hold SET until the LED blinks twice, then release SET. 3. Enter 9 9 1. The LED will blink twice. 4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off. 5. To lock in the code, press and release SET. The LED will blink twice.
Answers & Comments
I hope this would help you.
1, Turn on the tv.
2. On the remote control, press the tv key once.
3. Press and hold SET until the LED blinks twice, then release SET.
4. Use the code to locate the typ of device and brand name and then enter the first four digit code for the device. If performed correctly, The LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the tv and press power once. The TV should turn off. If it does not repeat steps 2 to 5. trying each code for your brand until find one that works. If it doesn't work, try searching for you code.
BTW, I don't know the brand of your tv so you might as well try these steps to search for you code but if you want to use the steps above just reply to this and send me the brand of your tv so i can search for the code.
1. On the renote control, press TV once.
2. Press and hold SET until the LED blinks twice, then release SET.
3. Enter 9 9 1. The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
5. To lock in the code, press and release SET. The LED will blink twice.