If you are looking at the projector with the lens facing you, look at the half moon shaped gray panel on the top and you will see a small **** that you can stick a flathead into. Slide the flathead away from the lens and the top should pop up. Then you will see the lamp. Unscrew the 3 or 4 screws on top of the lamp and pull it out using the wire handle on top of the lamp.
Answers & Comments
If you are looking at the projector with the lens facing you, look at the half moon shaped gray panel on the top and you will see a small **** that you can stick a flathead into. Slide the flathead away from the lens and the top should pop up. Then you will see the lamp. Unscrew the 3 or 4 screws on top of the lamp and pull it out using the wire handle on top of the lamp.