Typically you'll need to go through the trunk. If there isn't a cover panel to pull down and out of the way. The speakers should be held up in place with small nuts that are attached to threaded studs pointing down, usually 4 of them. Unclick the speaker wire connections first, then remove the nuts to pull the speaker down. I'll have to look at my car to verify but this is how most rear speakers are mounted.
You're in luck; your speakers are bottom-loaded, which means they're attached to the bottom of the shelf inside the trunk. Just climb in there, unscrew them, unplug them and take them out. See following more detailed steps. Make sure you purchase a speaker that's made for bottom-mounting, not all of them are. It needs a gasket on the front face so that the cone won't hit the surface you're mounting it to. A speaker harness adapter will make connecting the new speakers much easier.
1) Open the trunk lid and locate the speakers. They are afixed t the underside of the package tray.
2) remove the speaker enclosure retaining clips or screws and lower the enclosure to the trunk floor.
3) Remove the speaker mounting screws and remove the speakers from the enclosure.
Answers & Comments
Typically you'll need to go through the trunk. If there isn't a cover panel to pull down and out of the way. The speakers should be held up in place with small nuts that are attached to threaded studs pointing down, usually 4 of them. Unclick the speaker wire connections first, then remove the nuts to pull the speaker down. I'll have to look at my car to verify but this is how most rear speakers are mounted.
You're in luck; your speakers are bottom-loaded, which means they're attached to the bottom of the shelf inside the trunk. Just climb in there, unscrew them, unplug them and take them out. See following more detailed steps. Make sure you purchase a speaker that's made for bottom-mounting, not all of them are. It needs a gasket on the front face so that the cone won't hit the surface you're mounting it to. A speaker harness adapter will make connecting the new speakers much easier.
1) Open the trunk lid and locate the speakers. They are afixed t the underside of the package tray.
2) remove the speaker enclosure retaining clips or screws and lower the enclosure to the trunk floor.
3) Remove the speaker mounting screws and remove the speakers from the enclosure.
4) Unplug the electrical connector.
5) Installation is the reverse of removal.
You can get to them through the trunk up under the parcel tray behind the back seat.
Your speakers are accessible from the trunk. Get in the trunk and you will see a cover that is removeable.