Programming is done on M7310, M7324 and T7316 sets. To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344. The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming. At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow) The display should sat LINE ACCESS Press the show key (top right arrow) . The display should say LINE ASSIGNMENT. Press the show key (top right arrow) . The display ask for a line number. press list The display should say line 001: appear only press the Chng key till it says appear & ring press next key (lower right arrow) The display should say line 002: appear only repeat the procedure the same as line 001 for the remaining ringing lines
I fixed this issue yesterday with your great advice, thanks. Problem now though... voicemail picks up on one of the terminals now that I programmed it to ring for all incoming calls (only if he is on the phone) - now I do not know how to fix that? Please help!I fixed this issue yesterday with your great advice, thanks. Problem now though... voicemail picks up on one of the terminals now that I programmed it to ring for all incoming calls (only if he is on the phone) - now I do not know how to fix that? Please help!
Answers & Comments
Programming is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt,
press the show key (top right arrow).
The display should now ask for an extension number. Enter extension number you wish to program ringing on.
Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines
press the release key when finished
I fixed this issue yesterday with your great advice, thanks.
Problem now though... voicemail picks up on one of the terminals now that I programmed it to ring for all incoming calls (only if he is on the phone) - now I do not know how to fix that?
Please help!
Sounds like his call forward on busy is on.
At the terminals