How do I make the remote control work on my TV. Its an old Phillips and I can't seem to connect the one for all remote to allow my TV to work
Televison & Video - One For All - URC3110 Remote Control
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hi! Try these steps I hope it helps..
- Find codes for each device and brand below.
- Press and "HOLD" CODE SEARCH.
- Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
- Enter the three digit code from the TV, VCR or Cable Box code lists.
- Release CODE SEARCH.
- With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.
The codes for your tv are:006,007,010,011,013,016
027,033,035,043,066,087,089