Please be more specific, Open Your NAT. If your computer is being assigned an address in a private IP range, then NAT is active. If you are wanting to place your computer where it will be subjected to all incoming packets, then you will need to go through the options and find DMZ, and place our MAC address or IP# there.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.0.1 or http://192.168.1.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. .
If you are not able to access router with above ip and user password then press RESET button for 10 seconds it is in back side of router. Then you can access it with above method. Then click on Advanced menu and find NAT or port forwarding. Then you can openm port for tcp and udp for your games or otehr application .
Let me know if you need further assistance. Thanks for using FixYa.
Answers & Comments
Please be more specific, Open Your NAT. If your computer is being assigned an address in a private IP range, then NAT is active. If you are wanting to place your computer where it will be subjected to all incoming packets, then you will need to go through the options and find DMZ, and place our MAC address or IP# there.
Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.0.1
or
http://192.168.1.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
.
If you are not able to access router with above ip and user password then press RESET button for 10 seconds it is in back side of router.
Then you can access it with above method.
Then click on Advanced menu and find NAT or port forwarding.
Then you can openm port for tcp and udp for your games or otehr application .
Let me know if you need further assistance.
Thanks for using FixYa.