How do i re-connect the 110v Relay, dont know where the wires goe, there are three cords, one from thermo, one from motor and another from the motor side some where
I expect the thermostat wire will go to the relay coil, one will be a live supply and the other to feed the motor, the latter two will be connected to the relay contacts.
It is possible the motor is switched on the neutral side for added safety and in this case the wire from the motor will seem to be live and the other wire will be a neutral.
As there are three wires to the relay instead of the expected four - two for the coil and two for the contacts - I expect one end of the energising coil is connected internally to one of the switch contacts. In this case it will be necessary to connect the motor/supply wires the correct way around for it to function.
Answers & Comments
You will need to verify with a meter.
I expect the thermostat wire will go to the relay coil, one will be a live supply and the other to feed the motor, the latter two will be connected to the relay contacts.
It is possible the motor is switched on the neutral side for added safety and in this case the wire from the motor will seem to be live and the other wire will be a neutral.
As there are three wires to the relay instead of the expected four - two for the coil and two for the contacts - I expect one end of the energising coil is connected internally to one of the switch contacts. In this case it will be necessary to connect the motor/supply wires the correct way around for it to function.