Front prop shaft.. up front near the diff, there is a roll pin that goes through the input shaft to the front diff.. drive that out, then unbolt the four bolts on the bottom of the diff so you can move it forward. work it forward and get the u-joint off of the diff's input shaft.. when you get that free and out of the way, gently tap on the rear of the shaft to work it off of the transfer case's output shaft. hows that.. :)
Answers & Comments
Front prop shaft..
up front near the diff, there is a roll pin that goes through the input shaft to the front diff.. drive that out, then unbolt the four bolts on the bottom of the diff so you can move it forward.
work it forward and get the u-joint off of the diff's input shaft.. when you get that free and out of the way, gently tap on the rear of the shaft to work it off of the transfer case's output shaft.
hows that.. :)