How do i remove the camshaft sprocket bolt on a 1993 nissan maxima 3.OL?
I've been trying to remove the camshaft sprocket bolt on a 1993 nissan maxima and I can't get it off because the sprocket turns when i try to use a ratchet or breakerbar.
Cars & Trucks - Nissan
Answers & Comments
Hold sprocket with large plyers or strap around it wit old belt to lock it and or poke pry bar thru sprocket hole the loose the bolt, it is not that tight, or use an impact power tool to loosen
A cheat that works every time. Disconnect your spark plug leads, fit the socket and breaker bar to the sprocket bolt and rest the end of the bar on the chassis rail or frame (turn the breaker bar and socket on the sprocket bolt as if you're trying to undo the bolt until it makes contact with a part of the car that won't be damaged and maybe rest a rag under it) Turn the ignition key on and off rapidly 1-2 times and the torque from the starter motor will be more than sufficient to undo the bolt.
how can i tell if it' and interference engine and what is a T-bar handle ?
I researched the 93 Nissan Maxima 3.0 and the forums indicate that it is an interference engine. The T-bar handle is also known as a sliding socket wrench. Alternatively you can use a flexi handle (the breaker bar with a joint on the end to attach a socket) but some are not up to having an excessive load put on them. I don't know what engine bay clearance is like in the Maxima, but an impact gun may be an option as well.
Or buy a haynesmanual or library
An entire library would be cost prohibitive .