There is a serpinetine belt that goes around the p/s pump and the pulley and alternator. Ther are 2 bolts on the alternator one long that holds the alternator onto the vehicle and one short that adjusts the belts to tighten and loosen. Loosen both bolts, this allows the alternator to tilt letting you remove belt. Hope this helps. Good Luck
Answers & Comments
There is a serpinetine belt that goes around the p/s pump and the pulley and alternator. Ther are 2 bolts on the alternator one long that holds the alternator onto the vehicle and one short that adjusts the belts to tighten and loosen. Loosen both bolts, this allows the alternator to tilt letting you remove belt. Hope this helps. Good Luck