Please don't forget to rate! Thank you....
High-Mount Brake Light

1. Disconnect the negative battery cable.
   
2. Pull the center high-mount stop lamp cover to disengage the retaining tabs.
   
3. Unfasten the lamp retaining screws.
   
4. Remove the sockets using a suitable prybar to release the retaining tabs.
   
5. Detach the bulbs from their sockets.
   
6. Using a suitable prybar to release the tabs, remove the lamp lens.
   

1. Installation is the reverse to install. Connect the negative battery cable, then check the lamp for proper operation.