Use the override key to open the safe if you have to.If you don' t have the key, go to instructions below.
On the open rear inside of the open door there is a hidden red button.
Press this button, the yellow light will be on. Put in the code that you want.
You have to put in user code in 30 seconds.
If you don't remember your code, try 1,5,9 then press A or B
If the yellow light keeps flashing with beeps the code is not entered properly.
c. To change code repeat step a.
Test your new code before closing safe.
On the bottom of the safe there are holes meant to bolt the safe down. If you insert a thin pen or pencil through that hole on the bottom panel of the safe you will hit the red button.
Answers & Comments
Use the override key to open the safe if you have to.If you don' t have the key, go to instructions below.
On the open rear inside of the open door there is a hidden red button.
Press this button, the yellow light will be on. Put in the code that you want.
You have to put in user code in 30 seconds.
If you don't remember your code, try 1,5,9 then press A or B
If the yellow light keeps flashing with beeps the code is not entered properly.
c. To change code repeat step a.
Test your new code before closing safe.
On the bottom of the safe there are holes meant to bolt the safe down. If you insert a thin pen or pencil through that hole on the bottom panel of the safe you will hit the red button.
Thanks for your question.