Cut around the seam with a sharp xacto knife. It will open. the crystal had come loose. I glued and sildered it back on. I'm back in usiness.
I used a small sharp knife to pry the top off.the tabs did not break so I was able to snap it back together after repairing the wires
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Cut around the seam with a sharp xacto knife. It will open.
the crystal had come loose. I glued and sildered it back on. I'm back in usiness.
I used a small sharp knife to pry the top off.
the tabs did not break so I was able to snap it back together after repairing the wires