If you are talking about the serpentine belts, you can tighten them from the crankshaft pulley. You will need a large sprocket for this. Put the sprocket in and then move the pulley. This will give you the slack you need to put the belt on.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
If you are talking about the serpentine belts, you can tighten them from the crankshaft pulley. You will need a large sprocket for this. Put the sprocket in and then move the pulley. This will give you the slack you need to put the belt on.