How do I turn on my pandigital supernova tablet?
I haven't used my supernova tablet for about 6 months. When I go to turn it on, I push the power button and nothing happens, the screen stays black. How do I get it to turn on? This happened before and I had to push the volume down button with the power butto or something like that. Please help me.
Tablets & eReaders - PANDIGITAL - SuperNova
Answers & Comments
It could be two things, Jack: I would start by plugging it in to your charger for about 24 hrs to make sure it's not just the battery after that length of time not being used...OR, you might have to reset it to factory settings.
In the case of password lockouts or freezing, doing a hard reset on your android device could help you get back to the factory defaults.
First you need to make sure your tablet is powered off.
Hold down on the Volume + button and hold down the Power button at the same time.
- As soon as the tablet's screen turns on, let go of the Power button but keep the Volume + button held down until you see a large Android in the center of the screen.
- At this point you will see a screen with boot options.
- Use the Volume - button to go down to Wipe >On the next screen use the Volume - button again to go down to Yes and use the Power button to select.
- At this point it will be going through the wiping and resetting process.
- When it's done you will see the first screen you came to when you first started the setup.
- Just tap the Power button to select Reboot System Now.
Stuck in Android System Recovery Tips to Fix Recover Lost Data