In order to install the scanner in Windows Vista or Windows 7, you need to disconnect the scanner from the back of the computer's USB cable. Next install the driver and reboot your computer. Once your computer has rebooted connect the scanner to the back of the computer's USB connector. Also you need to check if the scanner is being detected without a yellow exclamation in the device manager. If a yellow exclamation is in device manager, remove the scanner from the device manger and reboot the computer. Visit the link below and download the main installer. http://support.microtek.com/downloads/drv_specific.phtml?slct_os=8&prod=34&bymdlnme=1 Right click the main installer and select run as administrator. Or..visit the link below : http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows and follow the instructions provided.
You should be able to use the driver for the XP. If you still have the disk you may use it. It should install it and get to a window that it would tell you that the driver is not a new one, you should be able to select 'Continue Anyway'
Unfortunately the device only has driver for XP. I think they discontinued this one.
You can download Windows 7 compatible driver of Microtek Scan maker i320 from " http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Microtek%20ScanMaker%20i320%20Scanner&v=Microtek&uid=110803660012&l=en-US&pf=31&pi=8&c=Printers%20%26%20Scanners&sc=Scanners&os=32-bit". Hope this will help you.
Answers & Comments
In order to install the scanner in Windows Vista or Windows 7, you need to disconnect the scanner from the back of the computer's USB cable. Next install the driver and reboot your computer. Once your computer has rebooted connect the scanner to the back of the computer's USB connector. Also you need to check if the scanner is being detected without a yellow exclamation in the device manager. If a yellow exclamation is in device manager, remove the scanner from the device manger and reboot the computer.
Visit the link below and download the main installer.
http://support.microtek.com/downloads/drv_specific.phtml?slct_os=8&prod=34&bymdlnme=1
Right click the main installer and select run as administrator.
Or..visit the link below :
http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows
and follow the instructions provided.
You should be able to use the driver for the XP. If you still have the disk you may use it. It should install it and get to a window that it would tell you that the driver is not a new one, you should be able to select 'Continue Anyway'
Unfortunately the device only has driver for XP. I think they discontinued this one.
here is more infor.. no other company, official that is that makes driver for this device
http://support.microtek.com/knowledgebas...
Hi,
You can download Windows 7 compatible driver of Microtek Scan maker i320 from " http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Microtek%20ScanMaker%20i320%20Scanner&v=Microtek&uid=110803660012&l=en-US&pf=31&pi=8&c=Printers%20%26%20Scanners&sc=Scanners&os=32-bit". Hope this will help you.