1) The error code 20230 on the Sawgrass printer shows there is a jam in the fuser.
2) To solve the problem, you need to remove the fuser from the Sawgrass SG800 printer.
3) Power Off your Sawgrass printer by force pressing its Power button. Ascertain that all the flags can move freely and check if they can stay in contact with each other.
4) Pull the fuser out of the device and discard the oil housing.
5) Tilt the paper width guides and check if the exit flags can move freely.
6) Reinstall the fuser and then press the Power button to switch On your Sawgrass printer.
Answers & Comments
1) The error code 20230 on the Sawgrass printer shows there is a jam in the fuser.
2) To solve the problem, you need to remove the fuser from the Sawgrass SG800 printer.
3) Power Off your Sawgrass printer by force pressing its Power button. Ascertain that all the flags can move freely and check if they can stay in contact with each other.
4) Pull the fuser out of the device and discard the oil housing.
5) Tilt the paper width guides and check if the exit flags can move freely.
6) Reinstall the fuser and then press the Power button to switch On your Sawgrass printer.