Unscrew the Door Rest, Pop the Clips from around the outside and then Lift UP. Then remove the Plastic Cover that is used for Noise Abatement There is an Electrical connector for the Regulator and then 4 Bolts that hold it in place, Loosen the Bolts that hold the Window to the Regulator Carefully slide the Glass down to the Bottom or support it while up Remove and Replace the Regulator and do the above Backwards..
NOTE: You will have to disconnect the Arm Rest, Mirrors, Window and Lock Control.
Answers & Comments
Unscrew the Door Rest, Pop the Clips from around the outside and then Lift UP.
Then remove the Plastic Cover that is used for Noise Abatement
There is an Electrical connector for the Regulator and then 4 Bolts that hold it in place, Loosen the Bolts that hold the Window to the Regulator
Carefully slide the Glass down to the Bottom or support it while up
Remove and Replace the Regulator and do the above Backwards..
NOTE: You will have to disconnect the Arm Rest, Mirrors, Window and Lock Control.