How do you register a old uniden SSE27 handset to a new Uniden SSE37 base
The SSE37 is just the new version of the SSE27 system for hearing and visually impaired The old base station died and I replaced it with the SSE37 but cannot register the old handset. I have manged to de register the old hand set from the old base station
Lands Phones - Uniden
Answers & Comments
The following is taken directly from the SSE37 owners' manual:
Registering a handset
If you see a "not registered" message on a handset,
you must register it to a base before using it.
1.
On the base, open the menu and select
Register Accy.
2.
On the handset, press and hold #/DND
until the handset display says
Handset Registering (about 2 seconds).
3.
Wait until the handset display says
Registration Complete (about 30 seconds),
then pick up the handset.
If you don't hear a dial tone or the display says
Registration Failed, charge the battery completely,
then try again.
Good luck!