There are small pins that are friction fit into the band. You will need a small screwdriver or something the less than the diameter of a paper clip. Using a small hammer tap the pin out in the direction of the arrow which is indicated on the back of the band. Do so for however many links that need to be removed. After doing this then put the band back together and replace the pin by taping it in until it is flush. Use a thin cloth over the pin when taping so you don't scratch the case. Good luck. If you need a professional go to a jeweler to help you out.. Thank you, Gabe.
Answers & Comments
There are small pins that are friction fit into the band. You will need a small screwdriver or something the less than the diameter of a paper clip. Using a small hammer tap the pin out in the direction of the arrow which is indicated on the back of the band. Do so for however many links that need to be removed. After doing this then put the band back together and replace the pin by taping it in until it is flush. Use a thin cloth over the pin when taping so you don't scratch the case. Good luck. If you need a professional go to a jeweler to help you out.. Thank you, Gabe.