This depends on the concentration of PCBs in the potting material and whether the ballast contains an intact or non-intact PCB small capacitor. If the PCB concentration of the potting material is <50 ppm and the ballast contains either no PCB small capacitor or an intact and non-leaking PCB small capacitor, you can dispose of the ballast as municipal solid waste (see §761.60(b)(2)(ii)). If the PCB concentration of the potting material is $50 ppm and the ballast contains either no PCB small capacitor or an intact and non-leaking PCB small capacitor, you can dispose of the ballast as PCB bulk product waste in a TSCA incinerator, a TSCA/RCRA landfill, a facility permitted, licensed, or registered by a state as a municipal or non-municipal non-hazardous waste landfill, or by means of an approved destruction method, decontamination, or risk-based disposal method (see §761.62). Regardless of the PCB concentration of the potting material, you must dispose of ballasts containing non-intact or leaking capacitors as PCB bulk product waste in accordance with §761.62(a) or (c). http://www.qjpcb.com/ Skype : wang.michelle35
Answers & Comments
This depends on the concentration of PCBs in the potting material and whether the ballast contains an intact or non-intact PCB small capacitor. If the PCB concentration of the potting material is <50 ppm and the ballast contains either no PCB small capacitor or an intact and non-leaking PCB small capacitor, you can dispose of the ballast as municipal solid waste (see §761.60(b)(2)(ii)). If the PCB concentration of the potting material is $50 ppm and the ballast contains either no PCB small capacitor or an intact and non-leaking PCB small capacitor, you can dispose of the ballast as PCB bulk product waste in a TSCA incinerator, a TSCA/RCRA landfill, a facility permitted, licensed, or registered by a state as a municipal or non-municipal non-hazardous waste landfill, or by means of an approved destruction method, decontamination, or risk-based disposal method (see §761.62). Regardless of the PCB concentration of the potting material, you must dispose of ballasts containing non-intact or leaking capacitors as PCB bulk product waste in accordance with §761.62(a) or (c).
http://www.qjpcb.com/ Skype : wang.michelle35