To modify the pressure: · Start the pump. · If the SET LED blinks, hold key + down until the SET LED remains on. · Then press keys + or - to modify the pressure value
To modify the pressure:
· Start the pump.
· If the SET LED blinks, hold key + down until the SET LED
remains on. · Then press keys + or - to modify the pressure value
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
To modify the pressure:
· Start the pump.
· If the SET LED blinks, hold key + down until the SET LED
remains on.
· Then press keys + or - to modify the pressure value