Pull gas line from gas tank to carburetor/injector/throttle body.If carb, turn on petcock, allowing gas to flow into a gas can.Remove gas cap to improve/increase flow.If injected, turn on ignition to cause fuel pump to turn on, flowing fuel under pressure into gas can.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Pull gas line from gas tank to carburetor/injector/throttle body.
If carb, turn on petcock, allowing gas to flow into a gas can.
Remove gas cap to improve/increase flow.
If injected, turn on ignition to cause fuel pump to turn on, flowing fuel under pressure into gas can.