The ABS carries out a self-test when the ignition is switched on. If no faults are found the light will go out. If the light stays on it means a fault has been discovered, recorded and the ABS will be switched off.
To rectify this condition the fault will have to be identified by a code read, the fault repaired and the fault code erased.
Answers & Comments
The ABS carries out a self-test when the ignition is switched on. If no faults are found the light will go out. If the light stays on it means a fault has been discovered, recorded and the ABS will be switched off.
To rectify this condition the fault will have to be identified by a code read, the fault repaired and the fault code erased.