Enter your equation on line Y1=, use the [X,theta,T] key to enter the X-variable
Press [EXE] when finished entering a function.
Enter other functions if you want.
When done, press [F6:Draw].
If you do not see a big portion of the curve you can press [SHIFT] [F2:Zoom] and select [F5:Auto]
I am enclosing screen captures. The screens you see may not look exactly as on the FX-9750G, but all menu commands you have to execute are accessed by the same key sequences.
Answers & Comments
To draw graphs.
- Turn calculator ON (isn't that obvious?)
- If you see no icons, press [MENU]
- Use arrow to move focus on GRAPH and press [EXE]
- By default, the graph type is Y=
- Enter your equation on line Y1=, use the [X,theta,T] key to enter the X-variable
- Press [EXE] when finished entering a function.
- Enter other functions if you want.
- When done, press [F6:Draw].
- If you do not see a big portion of the curve you can press [SHIFT] [F2:Zoom] and select [F5:Auto]
I am enclosing screen captures. The screens you see may not look exactly as on the FX-9750G, but all menu commands you have to execute are accessed by the same key sequences.This last one is obtained with the Zoom: Auto
The screen is from an FX-9750GII