Switch off with the main power switch. Remove the stylus. Remove the rubber feet. They prise out gently with a fine tipped flat blade screwdriver. Undo the two screws beneath. It should now be possible to use your nails to split the clamshell case. Start at the end that was screwed together. Work the case open as if it were hinged at the IR emitter end.
Answers & Comments
Switch off with the main power switch. Remove the stylus. Remove the rubber feet. They prise out gently with a fine tipped flat blade screwdriver. Undo the two screws beneath. It should now be possible to use your nails to split the clamshell case. Start at the end that was screwed together. Work the case open as if it were hinged at the IR emitter end.