How to lube a case 1840 drive chain, sounds like the chain is binding a bit, it only occours after a few hours of running the machine. will go away once cooled down, need to know how to gain access to the drive chains to lube them thanks
There is a drain plug at the back of each chain case, to let old fluid out. Once drained you can refill through the plug on the side between the wheels near the bottom of the case, or remove the 6 bolts that hold the outer bearing on the drive motor, and fill through that larger hole. Each side take 6 liters, and Case recommends their 10w-30 engine oil. In hot climates, 15w-40 engine oil will work.
Answers & Comments
There is a drain plug at the back of each chain case, to let old fluid out. Once drained you can refill through the plug on the side between the wheels near the bottom of the case, or remove the 6 bolts that hold the outer bearing on the drive motor, and fill through that larger hole. Each side take 6 liters, and Case recommends their 10w-30 engine oil. In hot climates, 15w-40 engine oil will work.