Go in from underneath with a long screwdriver and try to push the arm back that the cable is attached too ,sometimes its easier if an assistant pushes down on bonnet slightly to relieve the spring pressure
If the plastic latch is broken in side the car you can grab the end of the cable with a pair of pliers and pull it.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Go in from underneath with a long screwdriver and try to push the arm back that the cable is attached too ,sometimes its easier if an assistant pushes down on bonnet slightly to relieve the spring pressure
If the plastic latch is broken in side the car you can grab the end of the cable with a pair of pliers and pull it.