How to rebuild the 4 hard discs of the Iomega StorCenter ix4-200d
I have successfully updated the firmware of my Iomega StorCenter ix4-200d. Then I tried to upgrade the software itself using a USB key while pressing on the reset switch as long as needed but the device never was booting on the USB key ! I tried 3 different USB keys but the result was always a failure and now the partitions on the discs are deleted and there is no way for my Iomega StorCenter ix4-200d to boot again by itself . HELP please !
Computers & Internet - Iomega
Answers & Comments
I can't help you more than to point you (below) to the manual:
http://download.lenovo.com/nasupdate/manuals/ix4-200d_cloud/ix4-200d_en_us.pdf
If this helps, you can say so.
A