How to remove stand from iiyama E2607WDS monitor
I've got a wall bracket for my monitor, but can't work out how to remove the built in stand.
The only instructions in the manual are for attaching or removing the foot of the stand not the entire structure.
There are four screws inside the 'neck' of the stand. I tried removing these, but it had no effect. The plastic housing was still securely fixed to the metal foot inside the moulding.
Is it time to remove the case around the screen? Surely not!
The only instructions in the manual are for attaching or removing the foot of the stand not the entire structure.
There are four screws inside the 'neck' of the stand. I tried removing these, but it had no effect. The plastic housing was still securely fixed to the metal foot inside the moulding.
Is it time to remove the case around the screen? Surely not!
Computers & Internet - iiyama
Answers & Comments
One can only remove the plastic neck of the stand by removing not only its four visible screws, but also the two screws at the invisible inside of the neck. To get to these, you have to remove the neck together with its metal foot. To do so, you should remove the 4 [four!!] bolts/screws that fix the metal bracket to the frame of the monitor, and then loosen the two screws at the outer left and right of the plastic back of the monitor [to get some room to move], and then slide the metal foot down and out. After removing the neck [and if you wish: also the metal] you should reposition all 4 four!] of its bolts/screws, since these are needed to keep the front and back of the monitor together. Also thighten the 2 screws at the outer left and right.