Just an philips screw, you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.
If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door.
Answers & Comments
Just an philips screw, you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them.
If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door.
Hope helped with this (remember rated this).