How to take the cover off an elna air electronic
My elna air electronic TSP makes a popping noise inside like there is something wrong with the wiring. I've tried taking the cover off at the top and bottom but I think it's at the back or end of the machine I need to see into
Sewing Machines - Elna
Answers & Comments
Could you describe when you hear the popping noise? is it during stitching as a blunt needle will definitely make a popping or squeaking sound. To get into your AE TSP, unplug from the power, then there are two screws on the top cover holding it down that need to be removed. You can then juggle the top cover around the handle and move it to the back giving you access to the inside.
Getting into the right side behind the flywheel is a bit more difficult and you need to be careful as there is an electronic panel there connected to the internals.
The TSP would be circa 1985-89; if it hasn't had a service in last five years, then maybe consider finding an Elna dealer and taking it in as if it is the electrical side panel, it should be repairable. If you are in USA, White Sewing Centre is the place to talk to, they carry many Swiss Elna spare parts still.