How to unlock the chuck
I have a Milwaukee power plus drill 12 v rpm 0-1100. the numbers on bottom are 1124 and 0501-9. There is no chuck key insert. The chuck has a direction arrow for both open and close but if you turn it to open it just spins and I can't get the drill out. How do you do it I have cordless drill. Chuck has locked.any idea to open the chuck.thanks
Drills - Milwaukee - 0612-20 14.4v Cordless Drill Kit W/ Worklight
Answers & Comments
This how to get a chuck off a drill.look inside the chuck for a screw. it will be a left handed screw.once you get the screw out put the chuck in a vice . you will need to squeeze it very tight. then put the drill in reverse and pull the trigger.if i wont come off you will need to hit the chuck with a hammer while you are holding the trigger. if you have a bit stuck in the chuck and cant get it out put the chuck in the vice and hit it very hard with a hammer until the chuck falls apart.i work on drills every day ,this is the only way we have found that works
Is that how to open a stuck keyless chuck, by looking inside a chuck that us stuck in closed position?removing