Turn off and unplug your computer. Press the power button for about 10 seconds to ensure all power is drained (or at least as much as possible) Remove the cables from back of PC (as needed) Open the case Remove the screw holding down the video card. If there is a lock at the read of the video card (on the mainboard/motherboard), release it and remove the video card from the slot. There are three screws holding down the fan. Remove them with a correct tool. Remove the fan and unplug the cable. Installation is the reverse of the process.
Best wishes, Joe
I’m happy to help further over the phone at https://www.6ya.com/expert/mark_7bbaa7a1174e0903
Answers & Comments
Hello,
Turn off and unplug your computer.
Press the power button for about 10 seconds to ensure all power is drained (or at least as much as possible)
Remove the cables from back of PC (as needed)
Open the case
Remove the screw holding down the video card.
If there is a lock at the read of the video card (on the mainboard/motherboard), release it and remove the video card from the slot.
There are three screws holding down the fan. Remove them with a correct tool.
Remove the fan and unplug the cable.
Installation is the reverse of the process.
Best wishes,
Joe
I’m happy to help further over the phone at https://www.6ya.com/expert/mark_7bbaa7a1174e0903