I am getting a d5 error on my samsung front load washer
All the water does not drain after the wash cycle, so it won't advance to the next stage. I tested the drainage pump and it works fine. The hose from the drum to the water level sensor is not clogged, and I cleaned the filter.
Washing Machines - Samsung - WF328AA Front Load Washer
Answers & Comments
One common error with these machines Is that the water level sensor pipework has a small hole. The pipe is connected to the drum, and as the unit rotates it will cause the rubber tubing to be degraded. If a small tear appears it will cause the sensor to malfunction - when there is no negative pressure as the water drains (or vacuum) it assumes the water is still there/. Either find the tear and repair with bicyle repair kit, or if the tear is near to the sensor connector - cut off and reattach slightly shorter tube.