I am getting a message that there is no signal to my monitor from my cisnet computer. I have tried replacing the motherboard and upgrading the ram. The monitor works with my other computers. What else should I look at?
Computers & Internet - ZT Group - CISNET A7050 PC Desktop
Irst check the cable from the monitor is firmly connected to the graphics ports in the rear panel of the cpu tighten the two screws of the connector if you still have the problem then check the connector for any pin breakage if no pin breakage try adding an add on grapics card to the pci,agp or pci exp which is available in your motherboard if there is display then the problem is with connector in the motherboard
Answers & Comments
Irst check the cable from the monitor is firmly connected to the graphics ports in the rear panel of the cpu tighten the two screws of the connector if you still have the problem then check the connector for any pin breakage if no pin breakage try adding an add on grapics card to the pci,agp or pci exp which is available in your motherboard if there is display then the problem is with connector in the motherboard