I am having problems with an electrolux 12680 W. PNC 914522501 2007 production yr. It was making a strange sound and not pumping out water. No problem, I removed the front plug and cleaned out around the impellor. Now there is no water from the intake, it makes a constant sound as if the drain pump is running and if I put water into it manually it pumps it straight out. If I let it run through its 2 min drain cycle at the end of the cycle it will give an error beep with error code of E20
Washing Machines - Electrolux - EW1000i Front Load Washer
The hose coming from tub to the pump has a filter in it.you need to pull filter out and empty it.E20 means that you have a slow drain,or clog.If the pump is noisier than ussual then you may need to replace pump.but check filter first.
Answers & Comments
The hose coming from tub to the pump has a filter in it.you need to pull filter out and empty it.E20 means that you have a slow drain,or clog.If the pump is noisier than ussual then you may need to replace pump.but check filter first.
It can be dirt in the emptying hose or in the hose for the level switch/ presostat . Its monitoring water level in it.