Windows XP and Vista should "auto-detect" the capabilities of this LCD screen.
If not, access http://WindowsUpdate.Microsoft.com and scan for updates. When the scan is done, look for "optional hardware" updates. If Microsoft has a driver, it will be offered for download.
MAG'S Plug & Play monitors are designed to work with Windows 95/98/2000/ME operating system. MAG monitors comply with VESA DDC (Display Data Channel) Standards and are Plug & Play compatible. With the use of a DDC compatible video card, the EDID (Extended Display Identification) can be read from the MAG Monitor by Plug & Play compatible software, such as Windows 95/98/2000/ME.In order for Windows 95/98/2000/ME to detect the new monitor, you must ensure that the following minimum requirements are met:
(1).A DDC compatible video card is installed. If your video card is not DDC compatible, then auto-detection will not work.
(2).DDC detection is enabled in Windows '95/98/2000/ME/XP. This should be the case if you installed a DDC compatible video card. The *.INF file supplied with the video card should enable DDC in Windows 95/98/2000/ME/XP. If this is not the case, then auto-detection will fail.
(3).A DDC compatible monitor with it’s *.INF file installed into Windows 95/98/2000/ME/XP.
These are the details available from MAG website, Vista OS should ideally detect your monitor, the drivers for this model are no longer available on manufacturer website or any other site on web
Answers & Comments
Windows XP and Vista should "auto-detect" the capabilities of this LCD screen.
If not, access http://WindowsUpdate.Microsoft.com
and scan for updates.
When the scan is done, look for "optional hardware" updates.
If Microsoft has a driver, it will be offered for download.
MAG'S Plug & Play monitors are designed to work with Windows 95/98/2000/ME operating system. MAG monitors comply with VESA DDC (Display Data Channel) Standards and are Plug & Play compatible. With the use of a DDC compatible video card, the EDID (Extended Display Identification) can be read from the MAG Monitor by Plug & Play compatible software, such as Windows 95/98/2000/ME.In order for Windows 95/98/2000/ME to detect the new monitor, you must ensure that the following minimum requirements are met:
(1).A DDC compatible video card is installed. If your video card is not DDC compatible, then auto-detection will not work.
(2).DDC detection is enabled in Windows '95/98/2000/ME/XP. This should be the case if you installed a DDC compatible video card. The *.INF file supplied with the video card should enable DDC in Windows 95/98/2000/ME/XP. If this is not the case, then auto-detection will fail.
(3).A DDC compatible monitor with it’s *.INF file installed into Windows 95/98/2000/ME/XP.
These are the details available from MAG website, Vista OS should ideally detect your monitor, the drivers for this model are no longer available on manufacturer website or any other site on web