I am replacing the upper oven light socket in a Dacor CPS 230 (I think that is the model) oven. The part number is 86123 (Dacor) . The instructions are not as descriptive as I would hope. I want to confirm that I am removing the old light socket from inside the oven box, drilling two holes for the new socket, and attaching from the inside with the supplied screws. It seems straight forward, but before reaching the point of no return altering the oven by drilling ... I want to make sure this is correct since this is not how the oven was originally manufactured. Is there any guidance on orientation of the screws or cautions drilling into components above the oven box? Many thanks, Dave Crowell

Ovens - Dacor