I am trying to figure out the color for the wires on my 1992 Suzuki katana 600 for my new headlight bucket and for some reason the front ones won't work but back ones Doo and they blink fast is there any way to figure this out
Are you working on turn signals or head light? Blinkers going too far because there isn't enough of a load on the circuit. Burnt bulb in the front, or a wire not hooked up, maybe that's why they don't work and the back are going real fast. If you are putting in LED bulbs, without a resistor thwy qill not load the flaher enough either, and it will flash very quickly. As for color of the wire, usually you can Google wire diagrams for specific vehicles.
Answers & Comments
Are you working on turn signals or head light? Blinkers going too far because there isn't enough of a load on the circuit. Burnt bulb in the front, or a wire not hooked up, maybe that's why they don't work and the back are going real fast. If you are putting in LED bulbs, without a resistor thwy qill not load the flaher enough either, and it will flash very quickly. As for color of the wire, usually you can Google wire diagrams for specific vehicles.