Hi, Cheri Torres with DISH Network Customer Service here. Icame across your post and wanted to see if I could help. We do have a fewdifferent codes for each of our different models of remotes. You should be ableto find the model number of your remote on the back of the remote at the top;it is usually a two to three digit number with a decimal point. I will listhere for you the best codes for the Maganvox VCR/DVD combo and also theinstructions for addressing the remote to it. I unfortunately could only find afew codes for some of our remotes not all. For the 3.0, 3.1, and 3.2 IR remotesthe best codes are 658, 333, 001, 661, and 723. For the 4.0, 6.0 and 6.2 IR/UHFremotes the best codes for Magnavox are 500, 566, 661, 333, and 100. I hope youfind these codes and instructions useful and if you have any other questions orconcerns feel free to post back here or email me at [email protected] Instructions for addressing your DVD/VCR to DISH remote.
Press and hold the desired Mode button until all mode button (i.e. SAT,AUX,VCR,TV) back lights come on, then release.
Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
Press 0 for a TV
Press 1 for a VCR/DVD
Press 2 for any other device.
Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
Answers & Comments
Hi, Cheri Torres with DISH Network Customer Service here. Icame across your post and wanted to see if I could help. We do have a fewdifferent codes for each of our different models of remotes. You should be ableto find the model number of your remote on the back of the remote at the top;it is usually a two to three digit number with a decimal point. I will listhere for you the best codes for the Maganvox VCR/DVD combo and also theinstructions for addressing the remote to it. I unfortunately could only find afew codes for some of our remotes not all. For the 3.0, 3.1, and 3.2 IR remotesthe best codes are 658, 333, 001, 661, and 723. For the 4.0, 6.0 and 6.2 IR/UHFremotes the best codes for Magnavox are 500, 566, 661, 333, and 100. I hope youfind these codes and instructions useful and if you have any other questions orconcerns feel free to post back here or email me at [email protected]
- Press and hold the desired Mode button until all mode button (i.e. SAT,AUX,VCR,TV) back lights come on, then release.
- Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
- Press 0 for a TV
- Press 1 for a VCR/DVD
- Press 2 for any other device.
- Press the pound (#) button Note: The light will blink off after each digit is entered and then return to a steady light.
- Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
Instructions for addressing your DVD/VCR to DISH remote.