Take a look at this link for loads of Service and User Manuals Download Bargain Box The Home of Download Bargains
Here is a manual - http://ifixmachines.com/Janome-Model-634D/View-all-products.html The thread guide should be inside the door. Lift the antenna and presser foot. Turn the tensions to zero, if possible. Turn the handwheel so the upper looper is at the highest point - there may be a mark on the side of the serger to align with a mark on the handwheel. Begin threading from the right to the left, beginning with the lower looper.
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Take a look at this link for loads of Service and User Manuals
Download Bargain Box The Home of Download Bargains
Here is a manual - http://ifixmachines.com/Janome-Model-634D/View-all-products.html
The thread guide should be inside the door.
Lift the antenna and presser foot. Turn the tensions to zero, if possible.
Turn the handwheel so the upper looper is at the highest point - there may be a mark on the side of the serger to align with a mark on the handwheel.
Begin threading from the right to the left, beginning with the lower looper.