Hello, Step One: Prepare Phone- Turn on Bluetooth For most phones, go to Settings/ Tools menu and select Bluetooth or Connectivity and select "On." (Or see the user guide for your phone.) Step Two: Prepare Headset- Pairing Mode Begin with headset turned off. Turn headset on (hold call control button for 2 seconds until the light flashes blue) and it will automatically go into pairing mode, flashing red and blue Step Three: Pairing- Add Headset to Phone For most phones, go to Settings/Tools > Bluetooth > Search or Add a Device, then Select "220Plantronics." For passkey enter 0000. Headset will flash blue when paired successfully. It is now powered on and ready to use hope it works regards shaun
Step One:
Prepare Phone-
Turn on Bluetooth
For most phones, go to Settings/
Tools menu and select Bluetooth
or Connectivity and select "On."
(Or see the user guide for your phone.)
Step Two:
Prepare Headset-
Pairing Mode
Begin with headset turned off. Turn
headset on (hold call control button
for 2 seconds until the light flashes
blue) and it will automatically go
into pairing mode, flashing red and blue
Step Three:
Pairing-
Add Headset to Phone
For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device,
then Select "220Plantronics."
For passkey enter 0000. Headset
will flash blue when paired
successfully. It is now powered on and ready to use hope it works regards shaun
Copyright © 2024 QA.XPDF.PUB - All rights reserved.
Answers & Comments
Hello,
Step One:
Prepare Phone-
Turn on Bluetooth
For most phones, go to Settings/
Tools menu and select Bluetooth
or Connectivity and select "On."
(Or see the user guide for your
phone.)
Step Two:
Prepare Headset-
Pairing Mode
Begin with headset turned off. Turn
headset on (hold call control button
for 2 seconds until the light flashes
blue) and it will automatically go
into pairing mode, flashing red
and blue
Step Three:
Pairing-
Add Headset to Phone
For most phones, go to Settings/Tools
> Bluetooth > Search or Add a Device,
then Select "220Plantronics."
For passkey enter 0000. Headset
will flash blue when paired
successfully. It is now powered on
and ready to use hope it works
regards
shaun