I connected my QSC K12 to a powersupply that was dimmed, The power. Switch was turned on when I connected the power cord and I heard a booming sound that came with a spark.I suppose the fuse has to be replaced but there is no external fuse socket, are there any replaceble fuses inside?Where can I find them?
Music - QSC - K Series K8 2-way 8" Active Loudspeaker
This can be found on the QSC Support site and appears to be the only reference to the problem on these loudspeakers. Check the site at the link below:
Open up the cabinet, take a look and tighten up the clips that hold the fuse for the horn in place...Tech. support said they've seen that problem many times in the past.
Answers & Comments
This can be found on the QSC Support site and appears to be the only reference to the problem on these loudspeakers. Check the site at the link below:
Open up the cabinet, take a look and tighten up the clips that hold the fuse for the horn in place...Tech. support said they've seen that problem many times in the past.
http://forum.qscaudio.com/forum/search.php?fid[]=4&sid=f7645ff1016aafa7fd5b992d30770052
In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.