I converted my 82 jeeps manual brakes over to power now dont have a full pedal why?
I changed my 82 jeeps brakes over to power then I bleed the brakes the booster I got is off of a 93 model it had a proportion valve on it but my jeep has one on the frame will that valve be enough or will I have to use both I cant seem to get a good pedal it just goes to the floor can you help me?
Cars & Trucks
Answers & Comments
You need to use the valve on the frame. If you can't bypass the one on the booster, you'll have to get a booster off an older model.