You can try to reset the device. Here are the instructions for it. Also, you can get the instructions for it online. at http://www.novatelwireless.com/index.php?option=com_content&view=article&id=141&Itemid=50
This should help you. Here are the instructions. There is also an advisory on removing the battery out now. Please note this before you attempt to remove you battery. This step will not be necessary for the reset, but it is something you should know about your device. http://www.novatelwireless.com/index.php?option=com_content&view=article&id=247&Itemid=41
MASTER RESET INSTRUCTIONS:
The MiFi 2200 Device comes with a Master Reset button that allows you to return it to its factory default state.
The Master Reset button is recessed in a hold on the back of the device. You will need a paperclip or similar object to push the button.
?Make sure the MiFi Device is powered on.
?Locate the Master Reset button on the back of the device.
?Insert a paperclip into the hold and hold the button down for 5 seconds until the Power LED goes off.
Your list of wireless networks will now show the original default network when you first configured your device.
Answers & Comments
You can try to reset the device. Here are the instructions for it. Also, you can get the instructions for it online. at http://www.novatelwireless.com/index.php?option=com_content&view=article&id=141&Itemid=50
This should help you. Here are the instructions. There is also an advisory on removing the battery out now. Please note this before you attempt to remove you battery. This step will not be necessary for the reset, but it is something you should know about your device. http://www.novatelwireless.com/index.php?option=com_content&view=article&id=247&Itemid=41
MASTER RESET INSTRUCTIONS:
The MiFi 2200 Device comes with a Master Reset button that allows you to return it to its factory default state.
The Master Reset button is recessed in a hold on the back of the device. You will need a paperclip or similar object to push the button.
? Make sure the MiFi Device is powered on.
? Locate the Master Reset button on the back of the device.
? Insert a paperclip into the hold and hold the button down for 5 seconds until the Power LED goes off.
Your list of wireless networks will now show the original default network when you first configured your device.
? Connect to MiFi Device again.
Hope this helps you. Please leave some feedback.