You most likely have a wheel bearing going out. Try to identify which is squeeling. As these go you will notice a rust film on the wheel rim and the side of the car that is going bad.
This one I don't think I can help you any further without actually being there but I don't feel that the problems are related. For the ABS I would still stick with the wheel. Could be the lead to the sensor. The hand brake could be seized and not releasing all the way keeping the light on. The other suggestion mentioned for the blower motor makes sense on the squeal. I have had that before. Let me know what you find out. This one has me curious.This one I don't think I can help you any further without actually being there but I don't feel that the problems are related. For the ABS I would still stick with the wheel. Could be the lead to the sensor. The hand brake could be seized and not releasing all the way keeping the light on. The other suggestion mentioned for the blower motor makes sense on the squeal. I have had that before. Let me know what you find out. This one has me curious.
Thanks for your help, got it scanned and it came back as the master cylinder and actuator. Probably cost around $2500 to replace it - common problem in the cruisersThanks for your help, got it scanned and it came back as the master cylinder and actuator. Probably cost around $2500 to replace it - common problem in the cruisers
Answers & Comments
You most likely have a wheel bearing going out. Try to identify which is squeeling. As these go you will notice a rust film on the wheel rim and the side of the car that is going bad.
This one I don't think I can help you any further without actually being there but I don't feel that the problems are related. For the ABS I would still stick with the wheel. Could be the lead to the sensor. The hand brake could be seized and not releasing all the way keeping the light on. The other suggestion mentioned for the blower motor makes sense on the squeal. I have had that before. Let me know what you find out. This one has me curious.
Thanks for your help, got it scanned and it came back as the master cylinder and actuator. Probably cost around $2500 to replace it - common problem in the cruisers